• The Fibaro Bypass 2 is a device designed to work with the Fibaro Dimmer 2. The Bypass 2 is to be used with LED bulbs (such as a single 0.5 Watt LED) or energy saving compact fluorescent lamps. The Bypass 2 prevents LEDs from flickering and turned off compact fluorescent lamps from glowing.

    In a 2-wire connection, the Fibaro Bypass 2 reduces the minimum power of load required by the Dimmer for correct operation. The Bypass 2 provides powering of the Dimmer 2 in case of controlling low loads.

  • The button is a simple Z-Wave scene controller that allows you to activate or Deactivate any device or scene within your Z-Wave network. The button recognizes up to 6 different actions; 1 click, 2 clicks, 3 clicks, 4 clicks, 5 clicks and hold down. It is battery operated and can be mounted virtually anywhere in your home. Mount it on your end table next to your bed to quickly shut down your home for the night. For example, press the button Once and the system can turn off the lights, lock the doors, and set the alarm. The button comes in 8 different colors to match any interior. Compatible with most Z-Wave hubs such as home center 2, home center lite, SmartThings, homeseer, vera, Nexia and clare controls.

  • The FIBARO Dimmer 2 is a universal dimming module with built in power metering. The device allows remote control over many different light sources, which will also extend the lifespan of the lightbulbs and reduce electricity use. The Dimmer 2 works as both a standard dimmer or as a switch within a two-wire or three-wire electrical system. A built-in RGB LED light helps identify if it is within the network range, making installation a breeze.

  • The FIBARO Door/Window Sensor is the best designed and the smallest contact and temperature sensor available on the market. Its miniature dimensions and unusual lightness makes it almost invisible on your window frames and doors.

    • Suitable for monitoring almost any open/close object.
    • Perfect for cabinets, refrigerator doors, or roller blinds
    • Easily mounts with double-sided tape or screws
    • Tamper button detects removal or tampering
    • Automatically alerts you to low battery
    • Compatible with most Z-Wave controllers
     
  • The remotely operated FIBARO Double Switch 2 is designed to turn two electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be installed in wall switch boxes or housings. FIBARO Double Switch 2 can be controlled either via Z-Wave network or with a wall switch through a direct connection.

  • The FIBARO Flood Sensor is a perfect dance between art and design - beautiful and harmonious in every little detail. Just like in other FIBARO devices, the perfect form is equipped with the most advanced technology.

  • Fibaro has done it again with their amazing new z-wave motion sensor! Unlike any other product in its category and in conjunction with the immutable laws of architecture and the latest technology, the Fibaro motion sensor was created, your eye on the home.

  • The FIBARO RGBW Controller is a universal, Z-Wave compatible module that controls LED, RGB, RGBW strips, halogen lights and fans via 12 or 24 VDC. The device allows you to change the color of the lights from your mobile device whenever you want. Additionally, the controller supports up to four 0-10V passive analog sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors and light sensors. All IN and OUT terminals may be user-configured for LED control or 0V-10V signal readouts.

  • The remotely operated FIBARO Double Switch 2 is designed to turn one electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be installed in wall switch boxes or housings. FIBARO Double Switch 2 can be controlled either via Z-Wave network or with a wall switch through a direct connection.

  • Talk to your smart home in a way that’s fast and fun. The Fibaro Swipe Gesture Controller lets you command all of your Z-Wave devices with just the flick of your wrist. Swipe right to turn off your kitchen lights. Draw a clockwise circle to adjust your living room blinds.

    Fibaro Swipe Z-Wave Plus Gesture Controller FGGC-001 Hand Gestures

    Create up to 6 customizable gesture sequences to trigger scenes of your own design. Powered by battery or VDC cable, the Fibaro Swipe is a flexible companion that can be stationary or mobile. It can be featured prominently on your wall or made invisible underneath your kitchen counter — it will still register your commands! Equipped with the latest in Z-Wave Plus technology and AES-128 encryption, count on the Fibaro Swipe to be an instant, reliable, and safe answer to smart home control.

  • The Home Center 2 is a building management system accessed through a browser-based graphic interface or via the native mobile app. It manages FIBARO’s Z-Wave devices and other Z-Wave certified products.

  • Home Center Lite is the incredibly compact brain of the FIBARO system. When designing HCL, we used proven solutions that are also applied to Home Center 2. Designed with your needs in mind, HCL integrates with a vast number of multimedia systems in your home. Conveniently compact, HCL allows managing your intelligent home via a user-friendly interface and wireless communication.

Free WordPress Themes, Free Android Games